7757: Condition Management. New “Analysis Method” field available when creating a new Condition Category. Accessed by Admin – Condition Management - +New Condition Category
7782: Delete Dig Attachments: Admins can now delete attachments in Dig Management, even if they didn't upload them.
6690: Data Management IC Actions. Users can now create new IC actions in Admin - Data Management –Available Action grid.
1.2 Assessment Planning
7731: Hardness values.CIM can now read Brinell Hardness values from pipe tally, allowing for hard spot analysis
7721: Create Follow-up Assessment. “Assessment Type” is now asked user clicks "Create Follow-up” on an assessment. Accessed from Assessment Planning – Assessments grid. If ILI is the assessment type being copied, “Tool Technology” is asked as well.
7796: Hydrotest Work Order.Added Work Order # to Assessment Planning (Create) – Planning tab for hydrotests
7718:Tool Run Number.Changed“Vendor Job Reference #” to “Tool Run Number” in Assessment Planning – Planning tab
1.3 Integrity Compliance
API 1163 Level 2 & 3 analysis and reporting now available in Integrity Compliance.
6592: Actions inIC Footer.Added user-defined actions to footer of Integrity Compliance (Assign Action)page
6930Prior Repair Data column: Added a new column “Possible Prior Repair” to Integrity Compliance - Add Anomalies to indicate that an anomaly has possibly been repaired based on recoat information input into CIM.
7787: New PCFA Report.Added MAT-8 PCFA Results report, accessed via Post-Analysis Reports tab of Integrity Compliance (Edit) or Integrity Compliance (View).
1.4 Dig Management / Threat Monitoring
7688: Dig Sheet Number. Feature Dig Sheets are now named with the “Dig Number – Feature Dig Sheet” instead of the generic “Feature Dig Sheet”
7798: Modified By in TM. Added two new columns to Threat Monitoring – Anomalies grid: “Last Modified By”and “Last Modified Date”
1.5 Reports
7616:ML < 10% in ILI Summary. Improved the ILI Summary report to provide counts for features 0-10% depth; used to only have counts for 0 – 20% wall thickness.
7774: ID User for User-Defined Reports.Added a new column to User-Defined Reports table to identify which user created the report.
7715: SMYS in Workload Management.Add SMYS as a data property that can be viewed on theWorkload Management Summary report when report is in Edit Mode. To access, click Edit, Data, Workload Management, SMYS.
1.6 Internal Corrosion Module
7760 & 7761: Program Report Updates. Updates include:
Wall thickness column now only shows most common wall thickness
Inspection History shows“Assessment Name” and not just assessment year
New column added for CGR (from pit-to-pit calculation)
New ability to “Drill Through” to an Anomalies table from the Program Report.
7840: New Gas Quality Template. New template available to upload gas quality data, named “Gas Quality Vendor.”
2.0 Bug Fixes
2.1 Admin
7542: Condition Management. CIM now provides a more useful notification error when a user attempts to create a condition in Condition Management with a duplicate name.
7829: Condition Management. fixed bug where Default Analysis dropdown in Condition Management – Create Condition was showing items that are inactive.
7801: Workflow. Fixed bug that was causing workflow approval to fail for non-admin users if they are not the first user listed as an approver
7596: System Management: Fixed a bug where the "Active Indicator" filter would not clear in System Management when filters are reset.
7702: System Management. Fixed an issue where the maps in Admin - System Management would not plot correctly for lines with > 1 segment
2.2 Assessment Planning
6774: Save & New.Fixed a bug where "Save & New" button in Assessment Planning (Create)would not clear previous input. Now after pressing “Save & New” button, all fields in Assessment Details are blank, as they should be.
7756: System of Measure.Fixed a bug where System of Measure field in Assessment Planning – Vendor Data tab, Vendor Report Information box would save as blank when no vendor report file had been loaded.
7838:Assessments Grid Timeout.Fixed instance where Assessment Planning – Assessments grid was timing out.
2.3 Integrity Compliance
7486: “On Long Seam.”Fixed an issue where "Is On Long Seam" identification would not work as expected for ILIs with Origin Modes other than the default.
7786: “Jump to Distance.”Fixed a bug where the "Jump to Distance" feature in Integrity Compliance (Assign Action) - Alignment Bands would always be in feet regardless of System of Measurement setting.
6486: “Last Modified By.”Fixed a bug where the "Last Modified By" field is blank after an Integrity Compliance analysis is rejected.
7725: PCFA Growth Rate Source. Fixed a bug that was causing crack flaws utilizing PCFA for Crack Growth Method on Integrity Compliance – General tab to incorrectly show Simplified Fatigue as the Growth Rate Source.
2.4 Dig Management & Threat Monitoring
7858:Dig Sheet for 0 Anomalies.Fixed a bug where the Feature Dig Sheet would not generate properly if the target joint contained 0 anomalies. (Helpful for non – ILI related excavations!)
7582: New Threat Monitoring Filter. Fixed a bug where the "Watch List" checkbox filter in Threat Monitoring would not work as expected. Removed “Watch List” checkbox filter and replaced it with a New “Action” filter.
7779: Threat Monitoring Filter. Fixed a bug where the filter for “Vendor Tool Runs” on Threat Monitoring (Home) – Filters could display duplicate records in the dropdown.
7574: Threat Monitoring Comments. The @user feature in Threat Monitoring – Edit Comments was not working as it works in Assessment Planning i.e. when a user types @ in a comment field and starts typing, they should see a list of users that match what is typed.
2.5 Reports, Dashboards, Templates
7775: Repair Type Name.A more user-friendly “Repair Type Name” now displays on anomaly info pop-out on Unity Plots instead of CIM Repair Type Code
7690:Renamed Report.Renamed "Integrity Summary" report to "FPR & Remaining Life Analysis"to more accurately reflect what the report showsi.e. Failure Pressure Ratio and Remaining Life
7768: PQ Export.Fixed a bug where the Pipeline Questionnaire Export - Filters drop-down for Segment was displaying the segment length in feet instead of miles
6766:Fixed a bug where uploading the Analysis Results Template would not update the UserID
7545: Renamed the Feature Lineage Report dropdown from “System Name” to “Segment”
7750: Added new validations to Repair Template to prevent unexpected failures
5882: Renamed column in Analysis Results export from“Seam Type” to “Pipe Type”so that it matches the column headerfromthe “Add Anomalies” grid
2.6 Internal Corrosion Module
7520:Inspection Date Changing by 1 Day.Fixed a bug where dates could shift by 1 day from Inspection Date input on coupon, sample and chemical data templates
1. Enhancements
1.1 Admin
7757: Condition Management. New “Analysis Method” field available when creating a new Condition Category. Accessed by Admin – Condition Management - +New Condition Category
7782: Delete Dig Attachments: Admins can now delete attachments in Dig Management, even if they didn't upload them.
6690: Data Management IC Actions. Users can now create new IC actions in Admin - Data Management –Available Action grid.
1.2 Assessment Planning
7731: Hardness values.CIM can now read Brinell Hardness values from pipe tally, allowing for hard spot analysis
7721: Create Follow-up Assessment. “Assessment Type” is now asked user clicks "Create Follow-up” on an assessment. Accessed from Assessment Planning – Assessments grid. If ILI is the assessment type being copied, “Tool Technology” is asked as well.
7796: Hydrotest Work Order.Added Work Order # to Assessment Planning (Create) – Planning tab for hydrotests
7718:Tool Run Number.Changed“Vendor Job Reference #” to “Tool Run Number” in Assessment Planning – Planning tab
1.3 Integrity Compliance
API 1163 Level 2 & 3 analysis and reporting now available in Integrity Compliance.
6592: Actions inIC Footer.Added user-defined actions to footer of Integrity Compliance (Assign Action)page
6930Prior Repair Data column: Added a new column “Possible Prior Repair” to Integrity Compliance - Add Anomalies to indicate that an anomaly has possibly been repaired based on recoat information input into CIM.
7787: New PCFA Report.Added MAT-8 PCFA Results report, accessed via Post-Analysis Reports tab of Integrity Compliance (Edit) or Integrity Compliance (View).
1.4 Dig Management / Threat Monitoring
7688: Dig Sheet Number. Feature Dig Sheets are now named with the “Dig Number – Feature Dig Sheet” instead of the generic “Feature Dig Sheet”
7798: Modified By in TM. Added two new columns to Threat Monitoring – Anomalies grid: “Last Modified By”and “Last Modified Date”
1.5 Reports
7616:ML < 10% in ILI Summary. Improved the ILI Summary report to provide counts for features 0-10% depth; used to only have counts for 0 – 20% wall thickness.
7774: ID User for User-Defined Reports.Added a new column to User-Defined Reports table to identify which user created the report.
7715: SMYS in Workload Management.Add SMYS as a data property that can be viewed on theWorkload Management Summary report when report is in Edit Mode. To access, click Edit, Data, Workload Management, SMYS.
1.6 Internal Corrosion Module
7760 & 7761: Program Report Updates. Updates include:
Wall thickness column now only shows most common wall thickness
Inspection History shows“Assessment Name” and not just assessment year
New column added for CGR (from pit-to-pit calculation)
New ability to “Drill Through” to an Anomalies table from the Program Report.
7840: New Gas Quality Template. New template available to upload gas quality data, named “Gas Quality Vendor.”
2.0 Bug Fixes
2.1 Admin
7542: Condition Management. CIM now provides a more useful notification error when a user attempts to create a condition in Condition Management with a duplicate name.
7829: Condition Management. fixed bug where Default Analysis dropdown in Condition Management – Create Condition was showing items that are inactive.
7801: Workflow. Fixed bug that was causing workflow approval to fail for non-admin users if they are not the first user listed as an approver
7596: System Management: Fixed a bug where the "Active Indicator" filter would not clear in System Management when filters are reset.
7702: System Management. Fixed an issue where the maps in Admin - System Management would not plot correctly for lines with > 1 segment
2.2 Assessment Planning
6774: Save & New.Fixed a bug where "Save & New" button in Assessment Planning (Create)would not clear previous input. Now after pressing “Save & New” button, all fields in Assessment Details are blank, as they should be.
7756: System of Measure.Fixed a bug where System of Measure field in Assessment Planning – Vendor Data tab, Vendor Report Information box would save as blank when no vendor report file had been loaded.
7838:Assessments Grid Timeout.Fixed instance where Assessment Planning – Assessments grid was timing out.
2.3 Integrity Compliance
7486: “On Long Seam.”Fixed an issue where "Is On Long Seam" identification would not work as expected for ILIs with Origin Modes other than the default.
7786: “Jump to Distance.”Fixed a bug where the "Jump to Distance" feature in Integrity Compliance (Assign Action) - Alignment Bands would always be in feet regardless of System of Measurement setting.
6486: “Last Modified By.”Fixed a bug where the "Last Modified By" field is blank after an Integrity Compliance analysis is rejected.
7725: PCFA Growth Rate Source. Fixed a bug that was causing crack flaws utilizing PCFA for Crack Growth Method on Integrity Compliance – General tab to incorrectly show Simplified Fatigue as the Growth Rate Source.
2.4 Dig Management & Threat Monitoring
7858:Dig Sheet for 0 Anomalies.Fixed a bug where the Feature Dig Sheet would not generate properly if the target joint contained 0 anomalies. (Helpful for non – ILI related excavations!)
7582: New Threat Monitoring Filter. Fixed a bug where the "Watch List" checkbox filter in Threat Monitoring would not work as expected. Removed “Watch List” checkbox filter and replaced it with a New “Action” filter.
7779: Threat Monitoring Filter. Fixed a bug where the filter for “Vendor Tool Runs” on Threat Monitoring (Home) – Filters could display duplicate records in the dropdown.
7574: Threat Monitoring Comments. The @user feature in Threat Monitoring – Edit Comments was not working as it works in Assessment Planning i.e. when a user types @ in a comment field and starts typing, they should see a list of users that match what is typed.
2.5 Reports, Dashboards, Templates
7775: Repair Type Name.A more user-friendly “Repair Type Name” now displays on anomaly info pop-out on Unity Plots instead of CIM Repair Type Code
7690:Renamed Report.Renamed "Integrity Summary" report to "FPR & Remaining Life Analysis"to more accurately reflect what the report showsi.e. Failure Pressure Ratio and Remaining Life
7768: PQ Export.Fixed a bug where the Pipeline Questionnaire Export - Filters drop-down for Segment was displaying the segment length in feet instead of miles
6766:Fixed a bug where uploading the Analysis Results Template would not update the UserID
7545: Renamed the Feature Lineage Report dropdown from “System Name” to “Segment”
7750: Added new validations to Repair Template to prevent unexpected failures
5882: Renamed column in Analysis Results export from“Seam Type” to “Pipe Type”so that it matches the column headerfromthe “Add Anomalies” grid
2.6 Internal Corrosion Module
7520:Inspection Date Changing by 1 Day.Fixed a bug where dates could shift by 1 day from Inspection Date input on coupon, sample and chemical data templates
Attachments (1)
CIM 3.40 Vis....pdf
5.28 MB
0 Votes
0 Comments
Login or Sign up to post a comment